[Next] [Previous] [Up] [Top]

4.3 Data Transmission

4.3.2 Data Transfer from the LDC

Data is transferred out of the S-LINK as if the LDC were writing to a FIFO in the ROMB. The LDC provides a free-running clock (LCLK) which is always present if LDOWN# is high. If LDOWN# is low, LCLK is undefined.

When valid data arrives on the S-LINK, the LDC sets LWEN# low. The data words can then be latched on each low-to-high transition of LCLK. A timing diagram is shown in Figure 3.

FIGURE 3. Data Transfer from the LDC


The S-LINK Interface Specification - 27 MARCH 1997
[Next] [Previous] [Up] [Top]